TOSHIBA TECRA A10-1HK Laptop Keyboard, TECRA A10-1HK keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HK
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HK
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HK
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1HK keyboards tags: TOSHIBA Satellite M55 , Satellite A35 , Satellite M55 laptop keyboard , TOSHIBA Satellite 2415 , TOSHIBA Satellite R25. , Satellite A6 , Equium M30 , Satellite M2 , Satellite S205 laptop keyboard , Satellite A45 laptop keyboard , TOSHIBA Satellite M7 , TOSHIBA Satellite M7 , Satellite R25. laptop keyboard , Satellite M2 , Satellite A115 , Equium A60 , Satellite S3. laptop keyboard , Satellite A120 laptop keyboard , Tecra M9 laptop keyboard , TOSHIBA Satellite A1135 laptop keyboard , Satellite 2100. laptop keyboard , Satellite A1135 , TOSHIBA Satellite M40X laptop keyboard , Tecra A9-S901 , Satellite S3. , Satellite 1870 laptop keyboard , Tecra A9-ST90 , TOSHIBA Satellite S205 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1HK keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1HK keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1HK keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1HK laptop keyboard, please contact us.
TOSHIBA TECRA A10-1HK notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1HK keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1HK laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















